rc:arducopter-like-diy-quadcopter
This is an old revision of the document!
Arducopter like DIY quadcopter
| Specifications | |
|---|---|
| CPU | ArduPilot Mega |
| IMU | ArduPilot Mega |
| Motor | RCTimer 2830/13 850KV x 4 |
| ESC | RCTimer 20A x 4 |
| Prop | EPP 10x4.5 x 4 |
| Receiver | FrSky TFR8S |
| Battery | 3S1P 2650 mAh 3S1P 2200 mAh |
| Weight | around 1 kg with battery |
| M2M | 60 cm |
Lessons learned
- The collet type prop holders are too often out of balance and vibrations then cause problems
- If you plan on flying high then attach some leds for helping seeing the orientation
- Watch were the props are when carrying a bigger quadcopter through doorways
rc/arducopter-like-diy-quadcopter.1336503948.txt.gz · Last modified: 08.05.2012 22:05 by vergo
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
