User Tools

Site Tools


rc:diy-h-frame-fpv-quadcopter

This is an old revision of the document!


DIY H-Frame FPV Quadcopter

Specifications
Frame DIY (Plywood frame + square aluminium arms)
FC Naze32 (full), rev 5
Motor T-Motor MT2206-23 1200KV x 4
ESC Bull Tec 12A ESC (with simonk) x 4
Prop GemFan 8x4.5 x 4
Receiver FrSky TFR4
Camera CM-YN3130CH (PAL) with 2.8mm lens
VTX ImmersionRC 5.8 GHz 25 mW
Antenna Circular Polarized
OSD minimOSD with multiwiiosd
Battery Turnigy nano-tech 3S1P 2200 mAh
Weight 530 g
710 g (with battery)
750 g (with battery & mobius)
M2M 35 cm
Flight time around 6 minutes

Notes

  • This frame ended up not getting much use as Blackout Super Mini H Quad was suitable also for cruising and had a better form factor
  • Outdated and heavy design
  • Bigger 3S or similar 4S battery would likely have been more suitable
  • Lack of BEC causes one ESC to heat up far too much
  • Long frame causes too easily shadows for signals
rc/diy-h-frame-fpv-quadcopter.1465737507.txt.gz · Last modified: 12.06.2016 16:18 by vergo