Differences

This shows you the differences between two versions of the page.

--- rc:realacc-martian-iv-3-inch [11.08.2019 22:54]
vergo
+++ rc:realacc-martian-iv-3-inch [13.05.2021 01:51] (current)
vergo [Wiring]
@@ Line 7: / Line 7: @@
 | FC+ESC | HGLRC F4 Zeus |
 | Motors | RCX H1304 5000KV |
-| Props | HQProp T3x3x3\\ Emax Avan 3x2.4x3 |
+| Props | <del>HQProp T3x3x3</del>\\ Emax Avan 3x2.4x3\\ GemFan 3x1.6x3 |
-| Receiver | FrSky R-XSR |
+| Receiver | <del>FrSky R-XSR</del>\\ ImmersionRC Ghost Atto |
 | Camera | RunCam Robin with 1.8 mm lens |
 | DVR | RunCam Mini FPV DVR Module |
@@ Line 52: / Line 52: @@
 ===== Wiring =====
-{{:rc:files:martian4:martian_3inch.png?550|}}
+{{:rc:files:martian4:martian_3inch_ghost.png?550|}}
   * BB from FC connector (white wire) is for buzzer
   * S6 from FC connector (yellow wire) is DVR control
-  * TX6 from FC is used for VTX SmartAudio
+  * TX3 from FC is used for VTX SmartAudio
+  * TX6 from FC is used for the receiver
   * Dual ground wiring in DVR is needed to reduce signal noise
   * The FC connector is in reality in the top end of the FC but has been marked in the image on the side for clarity, unused wires can be removed
   * The shown wiring result in the OSD being visible in the video recorded by the DVR

HumdiWiki