rc:rcexplorer-tricopter
This is an old revision of the document!
build in progress, test flown without fpv equipment and some software issues found that remaing to be solved, after that one of the escs went in a fire... will be rebuild
RCExplorer Tricopter
| Specifications | |
|---|---|
| Frame | RCExplorer Tricopter V3 |
| FC | |
| Motor | RCTimer 2830/13 850KV x 3 |
| ESC | |
| Servo | Blue Bird BMS-210DMH |
| BEC | |
| OSD | MinimOSD |
| Prop | HQProp 9x5 Carbon reinforced |
| Receiver | FrSky TFR4 |
| Camera | ? |
| VTX | ImmersionRC 5.8 GHz 25 mW |
| Antenna | ImmersionRC Circular Polarized SpiroNET v2 |
| Battery | ZIPPY Flightmax 3000mAh 4S1P 20C |
| Weight | ? g ? g (with battery) |
| Flight time | ? |
Notes
- Sand the sharp cut edges of the arms in order to avoid having wires cut due to movement.
rc/rcexplorer-tricopter.1466446316.txt.gz · Last modified: 20.06.2016 21:11 by vergo
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
