This is an old revision of the document!

Lantian L90

Specifications
Frame	Lantian L90
FC	F3 V2 RacerCube w/ BEC & LC Filter & OSD (from MyRCMart)
ESC	BLHELI_S V2 10A 4in1 ESC (from MyRCMart)
Motor	Racerstar Racing Edition 1103 BR1103B 8000KV x 4
Prop	Kingkong 1935 3-Blade Bullnose
Receiver	FS-RX2A Pro
Camera	600TVL 1/4 1.8mm CMOS FPV 170 Degree Wide Angle Lens (from Banggood)
VTX	Eachine VTX03
Battery	Turnigy nano-tech 2S1P 460 mAh 25-40C

Weight	57 g 88 g (with 2S1P 460 mAh battery)
M2M	9 cm
Flight time	4-5 minutes

Notes

Edges of frame pieces should be sanded to avoid wear in wiring
Camera has been mounted with rubber O-rings due to lack of better mount
Receiver antenna has been reinforced with cable tie + heat shrink
Don't attempt to flash the ESC firmware, 1 of 4 is likely to fail if done via FC, however changing settings is ok