Differences

This shows you the differences between two versions of the page.

--- rc:krieger [14.06.2016 19:47]
vergo [Betaflight (2.8.1)]
+++ rc:krieger [02.07.2018 21:58] (current)
vergo
@@ Line 3: / Line 3: @@
 ====== Krieger ======
-{{ :rc:files:krieger:krieger.jpg?direct&400|}}
+{{ :rc:files:krieger:krieger_v2.jpg?direct&400|}}
 ^  Specifications  ^^
@@ Line 13: / Line 13: @@
 | OSD | Micro MinimOSD |
 | Misc | Rctimer Voltage & Current Sensor |
-| Prop | DAL Prop 5045 or 5045BN |
+| Prop | <del>DAL Prop 5045 (breaks in mid air)\\ DAL Prop 5045BN (too heavy)</del>\\ HQProp 5045 |
 | Receiver | Corona R4FA-SB |
 | Camera | RunCam 600TVL Mini with 2.8mm lens |
@@ Line 22: / Line 22: @@
 | Weight | 340 g\\ 565 g (with 4S1P 1800 mAh battery) |
 | M2M | 20 cm |
-| Flight time | 6 minutes of cruising |
+| Flight time | 6-7 minutes of cruising\\ 4-5 minutes of faster flying |
 ===== Notes =====
@@ Line 47: / Line 47: @@
     * ''feature CURRENT_METER''
     * ''set current_meter_type = ADC''
-    * ''set current_meter_scale = 877''
+    * ''set current_meter_scale = 366''
+      * use 732 for a 45A sensor (or if the board fails to act like a 90A)
   * No beeper when USB is connected
     * ''beeper -ON_USB''
@@ Line 66: / Line 67: @@
     * ''serial 1 1 115200 57600 0 115200''
     * ''serial 2 64 115200 57600 0 115200''
+  * Onboard flash for blackbox
+    * ''set blackbox_device = SPIFLASH''
 ==== BLHeli (14.6) ====
@@ Line 80: / Line 83: @@
 In Config.h
+{{ :rc:files:krieger:mwosd_settings.png?direct&300|}}
 <code>
 #define MICROMINIMOSD

HumdiWiki

User Tools

Site Tools

Differences

Page Tools