Differences

This shows you the differences between two versions of the page.

--- rc:diy-h-frame-fpv-quadcopter [12.06.2016 16:11]
vergo
+++ rc:diy-h-frame-fpv-quadcopter [12.06.2016 17:06]
vergo
@@ Line 3: / Line 3: @@
 ====== DIY H-Frame FPV Quadcopter ======
-{{ :rc:files:fpvhframe:hquad_8inch_final.png?direct&400|}}
+{{ :rc:files:fpvhframe:diy_fpvquad.jpg?direct&400|}}
 ^  Specifications  ^^
-| Frame | DIY |
+| Frame | DIY (Plywood frame + square aluminium arms) |
 | FC | Naze32 (full), rev 5 |
 | Motor | T-Motor MT2206-23 1200KV x 4 |
@@ Line 18: / Line 18: @@
 | Battery | Turnigy nano-tech 3S1P 2200 mAh |
 ^ ^^
+| Weight | 530 g\\ 710 g (with battery)\\ 750 g (with battery & mobius) |
 | M2M | 35 cm |
+| Flight time | around 6 minutes |
 ===== Notes =====
@@ Line 24: / Line 26: @@
   * This frame ended up not getting much use as [[rc:blackout-super-mini-h-quad|Blackout Super Mini H Quad]] was suitable also for cruising and had a better form factor
   * Outdated and heavy design
-  * Battery too small, 4S would likely have been more suitable
+  * Bigger 3S or similar 4S battery would likely have been more suitable
+    * Used motors are rated for 2-3S
   * Lack of BEC causes one ESC to heat up far too much
   * Long frame causes too easily shadows for signals
+===== The Plan =====
+{{:rc:files:fpvhframe:hquad_8inch_final.png?direct&550|}}

HumdiWiki