User Tools

Site Tools


rc:flashing-afroflight32-firmware-in-linux

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

rc:flashing-afroflight32-firmware-in-linux [03.04.2012 20:04]
vergo created
rc:flashing-afroflight32-firmware-in-linux [06.04.2012 18:34] (current)
vergo
Line 19: Line 19:
 In my case, the board was attached to ttyUSB0 so it can now be accessed with /​dev/​ttyUSB0. There are two ways of setting the serial port settings and activating the flash mode. The first one consists of two command: In my case, the board was attached to ttyUSB0 so it can now be accessed with /​dev/​ttyUSB0. There are two ways of setting the serial port settings and activating the flash mode. The first one consists of two command:
  
-  * stty -F /​dev/​ttyUSB0 115200+  * stty -F /​dev/​ttyUSB0 ​raw speed 115200 ​-crtscts cs8 -parenb -cstopb -ixon
   * echo -n '​R'​ >/​dev/​ttyUSB0   * echo -n '​R'​ >/​dev/​ttyUSB0
  
rc/flashing-afroflight32-firmware-in-linux.txt ยท Last modified: 06.04.2012 18:34 by vergo