User Tools

Site Tools


rc:diy-h-frame-fpv-quadcopter

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
rc:diy-h-frame-fpv-quadcopter [01.03.2015 21:02]
vergo
rc:diy-h-frame-fpv-quadcopter [12.06.2016 17:06]
vergo
Line 3: Line 3:
 ====== DIY H-Frame FPV Quadcopter ====== ====== DIY H-Frame FPV Quadcopter ======
  
-{{ :rc:files:fpvhframe:hquad_8inch_final.png?direct&400|}}+{{ :rc:files:fpvhframe:diy_fpvquad.jpg?direct&400|}}
  
 ^  Specifications  ^^ ^  Specifications  ^^
-| Frame | DIY |+| Frame | DIY (Plywood frame + square aluminium arms) |
 | FC | Naze32 (full), rev 5 | | FC | Naze32 (full), rev 5 |
 | Motor | T-Motor MT2206-23 1200KV x 4 | | Motor | T-Motor MT2206-23 1200KV x 4 |
Line 12: Line 12:
 | Prop | GemFan 8x4.5 x 4 | | Prop | GemFan 8x4.5 x 4 |
 | Receiver | FrSky TFR4 | | Receiver | FrSky TFR4 |
 +| Camera | CM-YN3130CH (PAL) with 2.8mm lens |
 +| VTX | ImmersionRC 5.8 GHz 25 mW |
 +| Antenna | Circular Polarized |
 +| OSD | minimOSD with multiwiiosd |
 | Battery | Turnigy nano-tech 3S1P 2200 mAh | | Battery | Turnigy nano-tech 3S1P 2200 mAh |
 ^ ^^ ^ ^^
 +| Weight | 530 g\\ 710 g (with battery)\\ 750 g (with battery & mobius) |
 | M2M | 35 cm | | M2M | 35 cm |
 +| Flight time | around 6 minutes |
  
 +===== Notes =====
 +
 +  * This frame ended up not getting much use as [[rc:blackout-super-mini-h-quad|Blackout Super Mini H Quad]] was suitable also for cruising and had a better form factor
 +  * Outdated and heavy design
 +  * Bigger 3S or similar 4S battery would likely have been more suitable
 +    * Used motors are rated for 2-3S
 +  * Lack of BEC causes one ESC to heat up far too much
 +  * Long frame causes too easily shadows for signals
 +
 +===== The Plan =====
 +
 +{{:rc:files:fpvhframe:hquad_8inch_final.png?direct&550|}}
rc/diy-h-frame-fpv-quadcopter.txt ยท Last modified: 19.06.2016 13:16 by vergo