rc:crab-20-quadcopter
This is an old revision of the document!
Crab 20 Quadcopter
| Specifications | |
|---|---|
| Frame | BambuCopter Crab 20 |
| FC | Naze32 |
| Motor | T-Motor MT1306 3100KV x 4 |
| ESC | Turnigy Plush 6A x 4 |
| Prop | GemFan 5x3 x 4 |
| Receiver | FrSky TFR4-B |
| Battery | Turnigy nano-tech 2S1P 950 mAh |
| Weight | 145 g 192 g (with battery) |
| M2M | 20 cm |
| Flight time | around 6-8 minutes |
Notes
- The frame material doesn't like threadlock so don't use
- Don't overtighten motor screws since that may cause the frame material to crack
- Short motor shafts equal low spinning propellers, watch your fingers when hand testing
rc/crab-20-quadcopter.1351976788.txt.gz · Last modified: 03.11.2012 23:06 by vergo
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
