This is an old revision of the document!
Turnigy Bonsai
Specifications |
Motor | T-Motor MT1306 3100KV |
ESC | HobbyKing 12A |
Servos | 2 x Hextronik HXT500 |
Prop | GemFan 5x3 |
Receiver | FrSky TFR4-B |
Battery | Turnigy nano-tech 2S1P 950 mAh |
|
Weight | 145 g (with battery) |
Flight time | 6-10 minutes |
Notes
the carbon rods + z bend pieces don't stay well together using only heatshrink
heavier than suggested battery was needed for achieving correct center of gravity
the servos stays well in place even without glue
battery and receiver compartments are too small by default
hot glue was used during assembly instead of CA