This is an old revision of the document!
Crab 20 Quadcopter
Specifications |
Frame | BambuCopter Crab 20 |
FC | Naze32 |
Motor | T-Motor MT1306 3100KV x 4 |
ESC | Turnigy Plush 6A x 4 |
Prop | GemFan 5x3 x 4 |
Receiver | FrSky TFR4-B |
Battery | Turnigy nano-tech 2S1P 950 mAh |
|
Weight | 145 g
192 g (with battery) |
M2M | 20 cm |
Flight time | around 6-8 minutes |
Notes
The frame material doesn't like threadlock so don't use
Don't overtighten motor screws since that may cause the frame material to crack
Short motor shafts equal low spinning propellers, watch your fingers when hand testing
Motor benchmark
The following motors were tested for this build:
The same motors using a 4x2.5 prop are shown as reference in the image.